How To Clean Mixer Grinder Blades

Mixer grinder blades can get quite dirty, and can be a hassle to clean. Here is a guide on how to clean mixer grinder blades.

How to Clean Mixer Grinder Jar & Blades #shorts #youtubeshorts

Cleaning mixer grinder blades doesn’t have to be a pain.

Mixer grinder blades can be cleaned in a number of ways. Wet methods include using a dishwashing detergent mixed with hot water. Or, use a commercial blade cleaner made specifically for mixer grinder blades. Dry methods include using a cloth impregnated with blade cleaner, or using a metal scouring pad. Be sure to wear gloves and eye protection when cleaning mixer grinder blades.

With these simple tips, you can clean your mixer grinder blades quickly and easily.

  1. Wet your hands and put some soap on them.
  2. Take the grinder blades out and put them in the sink.
  3. Wet your cloth and wring it out.
  4. Put the cloth over the blades and hold it there while you start scrubbing.
  5. Move the cloth around the blades and scrub until the soap is gone.
  6. Rinse the blades off and dry them off.

First, unplug your mixer grinder and remove the blades.

  1. Pour some hot water into the mixer grinder bowl.
  2. Add a thumbnail-sized piece of scotchbrite pad to the hot water.
  3. Swirl the water around the grinder blades for a few seconds.
  4. Grab the scotchbrite pad with one hand, and hold the mixer bowl with the other hand.
  5. Carefully pour the hot water over the scotchbrite pad.
  6. Be very careful not to splash the water onto your skin.
  7. Let the mixer grinder blades soak in the water for about five minutes.
  8. Rinse the blades off with cold water.

    9. Dry the blades with a towel.

Next, soak the blades in warm, soapy water for 5


Next, use a stiff brush to scrub the blades clean. Make sure to get into all the nooks and crannies.

Finally, use a dry cloth to buff the blades clean.


Cleaning a mixer grinder blades can seem daunting at first, but with a little know-how it can be a quick and easy task. Here are four tips for cleaning mixer grinder blades:

1. Always use a degreaser before cleaning your mixer grinder blades. This will remove any built-up residue and make the cleaning process much easier.

2. Use a stiff-bristled brush to clean the surface of the mixer grinder blades. Make sure to focus on the areas that are most difficult to reach.

3. Use a solution of hot water and ammonia to clean the blades. Pour a small amount of the solution onto the bristles of a brush, and use it to scrub the blades clean.

4. Let the blades dry completely before using them again.

After that, use a brush or cloth to scrub the blades clean.

  1. After grinding the ingredients, it is important to clean the blades of the mixer grinder. This can be done by using a brush or cloth. Scrub the blades clean of any residual powder or ingredients.

Finally, rinse the blades with clean water and dry them before putting them back on your mixer grinder.

  1. Clean your blades by washing them with a mild soap and water. Make sure to rinse them off completely.

    2. Dry the blades off with a cloth.

    3. Place the blades back on the mixer grinder and secure them in place.

    4. Turn on the mixer grinder and let it run until the blades are spinning.

    5. Stop the mixer grinder and use the caution handle to turn it off.

    6. Remove the blades from the mixer grinder and clean them again with a mild soap and water.

    7. Dry the blades off and store them in a safe place.

And that’s it! With just a few simple steps, you can easily clean your mixer grinder blades.

  1. First, take the grinder apart if it isn’t already. Remove any food that may be stuck to the blades.
  2. Wipe the blades down with a cloth or a paper towel.
  3. Pour some oil into the grinder, and turn it on to the lowest possible setting.
  4. Put the cloth over the blades, and hold it there as the blades spin.
  5. Keep the cloth on for about 30 seconds, or until the oil has soaked into the cloth and the blades are completely clean.
  6. Turn the blades off and let them cool before putting them back together.


Mixer grinder blades can get clogged with food debris and other debris. To clean them, use a damp cloth to wipe them down and then use a metal brush to clean the grinder wheel.

Leave a Comment